
20Y-70-31271 BUSHING
Description
The Komatsu 20Y-70-31271 bushing, also written 20Y7031271, is a cylindrical plain bearing that lines a bore and gives a pivot pin a low-friction, replaceable wear surface. Where it sits This bushing belongs to the arm and pin assembly. It works as a sacrificial part: it carries the radial load of the joint and wears so the pin and the housing bore do not. It also sets the running clearance of the joint. Signs it needs replacing Slop or play in the joint, caused by the bore wearing oval. Scoring or seizure marks, usually from poor lubrication or dirt getting in. Uneven wear at the edges, which points to a misaligned pin or a bushing pressed in out of round. Fretting or corrosion at the press-fit surface. Check the joint for measurable clearance and scoring at scheduled service, and keep the grease path clear and the seals intact. Replace the bushing once clearance goes past the equipment maker's wear limit. Send us the old bushing's number and the machine's serial number and we will confirm the match before you order.
Frequently Asked Questions
Should I replace the pin when I replace this bushing?
Replace the bushing as a matched set with its pin when clearance exceeds the equipment maker's wear limit, rather than on its own.
How long does shipping take and does it cost anything?
Shipping is free and every order ships by air with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.