
20Y-70-31272 BUSHING
Description
The Komatsu 20Y-70-31272 bushing is a cylindrical plain bearing that lines a pin bore and gives the joint a low-friction wear surface. It is also written 20Y7031272. Where it sits This bushing belongs to the arm group. It appears in the arm, the strengthened arm, the strengthened arm for a machine with 1 additional actuator, and the arm and pin assemblies. Its job is to take the wear so the arm bore does not. Signs it needs replacing Slop in the pin joint, which usually means the bore has worn oval. Misalignment at the joint. Scoring or seizure, often from poor lubrication or dirt getting in. Fretting or corrosion at the press-fit seat. Keep the grease path clear and the seals that hold the lubricant in place. Replace the bushing together with its pin as a matched set once clearance goes past the equipment maker's wear limit. Do not change the bushing on its own. Send us the part number from your arm parts drawing and the machine serial number so we can confirm the fit before you order.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.