Marketplace of Heavy Machinery Spare Parts

20Y7032410, 20Y-70-32410 BUSHING KOMATSU

$164.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 20Y-70-32410
Availability: In Stock
A replaceable sleeve bearing that lines a pin bore in the arm assembly and takes the wear so the pin and its housing do not.

Description

The Komatsu 20Y-70-32410 bushing, also written 20Y7032410, is a cylindrical plain bearing that lines a pin bore and gives the joint a low-friction, replaceable wear surface. Where it sits Our parts catalogue places this bushing in the arm assemblies, including the arm and pin groups. It is a pin-joint part, so it works with the pin that runs through it, not on its own. How it wears The bushing is the sacrificial part of the joint. It carries the radial load and sets the running clearance, so the pin and the bore stay in better shape. Over time the bore goes oval and the joint gets sloppy. Play at the pin joint and visible misalignment. Scoring or seizure marks, which point to poor lubrication or dirt getting in. Uneven wear on one edge, which points to a misaligned pin or a bushing pressed in out of round. Fretting or corrosion at the press-fit seat. When to replace Check the joint for measurable clearance and scoring at scheduled service. Keep the grease path clear and the seals intact so lubricant stays in. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit, because a new bushing on a worn pin wears out quickly.

Frequently Asked Questions

How fast does an order ship, and does it cost anything?

Shipping is free and every order ships by air with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

What should I send to confirm this bushing before I order?

Send the machine's serial number and the number on the worn bushing. We will check them against part number 20Y7032410 before you order.

Loading product...

Related Products