
22W1529710, 22W-15-29710 Bushing Komatsu
Description
The Komatsu 22W1529710 bushing is a cylindrical plain bearing bush that lines a bore and gives a replaceable, low-friction wear surface, most often between a pivot pin and its housing. It weighs 0.02 kg, measured on our scale. What this bushing does The bushing carries the radial load of the joint while the pin turns or slides in it. It wears so the pin and the housing bore do not, and it sets the running clearance of the joint. That makes it a part you expect to replace. Signs it needs replacing Slop or play in the joint, which usually means the bore has worn oval. Scoring on the bore, which points to poor lubrication or dirt getting in. Uneven wear along the edges, which points to a misaligned pin or a bushing pressed in out of round. Fretting or corrosion at the press-fit seat. Fitting advice Check the grease path is clear and the seals that hold the lubricant are intact before you fit the new bushing. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit, not on its own, because a new bushing on a worn pin wears out quickly. Send us the number from your old bushing and the pin it runs on, and we will check them against this one.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order, to every destination, and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.