
2322731450, 232-27-31450 Bushing Komatsu
Description
The Komatsu 2322731450 bushing is a cylindrical plain bearing that lines a bore as a low-friction, replaceable wear surface, usually between a pivot pin and its housing. It is also written 232-27-31450. Our scale puts it at 0.26 kg. What it does at the joint The bushing carries the radial load while the joint turns and sets the running clearance. It wears so the pin and the housing do not. That makes it a serviceable item, and it is cheaper to replace than the parts around it. Signs it needs replacing Slop or play at the joint, which means the bore has worn oval and the clearance has grown. Scoring in the bore, usually from poor lubrication or dirt getting in. Uneven wear along one edge, which points to a misaligned pin or a bushing pressed in out of round. Fretting or corrosion marks where the bushing sits in its seat. Fitting it Check for clearance and scoring at each scheduled service. Keep the grease path open and the seals that hold the lubricant in good condition. Replace the bushing together with its pin once the clearance goes past the equipment maker's wear limit, because a new bushing on a worn pin wears out quickly.
Frequently Asked Questions
How fast does an order arrive and does it ship with tracking?
Shipping is free on every order. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door, and every order ships with tracking.
What should I send you to check the fit before ordering?
Send the number stamped or written on the worn bushing, or the machine's serial number, so we can compare it with 2322731450. We answer enquiries within 24 hours.