
2327054440, 232-70-54440 Bushing Komatsu
Description
The Komatsu 2327054440 bushing is a cylindrical plain bearing that lines a bore in the circle reverse gear group. It gives the pivoting parts a low-friction wear surface, so the wear lands on a cheap bush and not on the gear or housing around it. What to know about this bushing It is a small part. Net weight is 0.2 kg, measured on our scale. The catalogue lists it in several circle reverse gear arrangements, including clutch-type, dry-type and wet-type, and the same part number appears in all of them. Signs it needs replacing Play in the joint, which means the bore has worn oval and the clearance has grown. Scoring on the bore or the mating pin, usually from poor lubrication or dirt getting in. Uneven wear along one edge, which points to a misaligned pin or a bushing pressed in out of round. Fretting or corrosion marks where the bushing sits in its seat. Fitting it Replace the bushing together with its mating pin once clearance passes the equipment maker's wear limit. A new bushing on a worn pin loses its clearance quickly. Keep the grease path clear and the seals that hold lubricant in place intact, or the new bushing will score the same way. Send us the number from your old bushing and the machine's serial number, and we will confirm the fit before you order.
Frequently Asked Questions
What should I send to check this bushing against my machine?
Send the machine's serial number and a photo of the old bushing, along with the number stamped on it. We will check them against this part number before you order.
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment goes by air with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.