
2341511220, 234-15-11220 Ring Seal Komatsu
Description
The Komatsu 2341511220 ring seal is a small elastomeric seal from the torque converter and transmission output coupling group, also written 234-15-11220. It weighs 0.16 kg, measured on our scale. What this seal does A seal closes the gap between a moving part and a stationary one. It keeps lubricant in and keeps dirt and water out. In an output coupling, that means the oil stays in the housing and grit stays out of the joint. How seals wear out The elastomer hardens, cracks or takes a compression set from age and heat. A seal that rides on a shaft wears at the lip and can groove the shaft. A ring under high pressure can be pushed into the clearance gap if there is no back-up ring. The wrong fluid makes the material swell or shrink. When to replace it Replace the seal every time the joint is opened. Check the sealing surface and the groove or bore for wear or damage before the new seal goes in, because a damaged surface will cut a fresh seal. Wet marks around the joint are the usual sign it has stopped sealing. If you are unsure of the match, send the machine's serial number and we will check it against this number.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.