
2342731910, 234-27-31910 Pin Komatsu
Description
The Komatsu 2342731910 pin is a pivot pin, the cylindrical shaft that forms the axis of a pinned joint and mates with a bushing. It is also written 234-27-31910. This one weighs 1.48 kg, measured on our scale. What it does in the joint The pin carries shear load between the linked members while the joint swings. It sets the running clearance together with its bushing. A pivot pin is normally hardened and ground so that wear ends up in the cheaper bushing, not in the pin. Signs it needs replacing Scoring or ovality on the pin surface, which opens up the joint clearance. A pin that is no longer straight, from bending or shear fatigue after shock loading. Pitting or corrosion where the surface layer has broken through. Worn keeper plates or snap rings, which let the pin walk out. Replacing it Check the pin for scoring, ovality and straightness at service, and keep the joint lubricated. Replace the pin together with its bushing when either one is past its wear limit, because a new pin in a worn bushing wears out fast. Check the retention hardware at the same time. Send us the number from your old pin and your machine's serial number, and we will confirm it is the right one before you order.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send you to check this is the right pin?
Send the part number from your old pin, a few photos of it, and your machine's serial number. We compare them with this part before you order.