Marketplace of Heavy Machinery Spare Parts

2342731920, 234-27-31920 Bushing Komatsu

$160.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 2342731920
Availability: In Stock
A Komatsu bushing that sits in the bore of a pin joint and takes the wear so the pin and its housing do not.

Description

The Komatsu 2342731920 bushing, also written 234-27-31920, is a cylindrical plain bearing that lines a bore and gives a pivot pin a low-friction, replaceable surface to turn in. It weighs 0.08 kg, measured on our scale. How a bushing wears A bushing carries the radial load of the joint and sets its running clearance. It is built to wear, so the pin and the housing around it last longer. These are the failures to look for: Clearance growth, where the bore goes oval and the joint develops slop and misalignment. Scoring and seizure, usually from poor lubrication or dirt getting into the joint. Edge loading and fatigue, where the pin is misaligned or the bushing was pressed in out of round. Fretting and corrosion at the press-fit surface. When to replace it Check the bushing at scheduled service for measurable clearance and scoring. Keep the grease path clear and the seals that hold the lubricant in intact. Replace it together with its pin once clearance goes past the equipment maker's wear limit. A new bushing on a worn pin wears out quickly. To check the fit, send us the number on your old bushing, or the machine's serial number.

Frequently Asked Questions

How long does shipping take and what does it cost?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products