
2347113190, 234-71-13190 Bushing Komatsu
Description
The Komatsu 2347113190 bushing is a cylindrical plain bearing that lines a bore, giving a replaceable wear surface between a pivot pin and its housing. It is also written 234-71-13190. It sits in the Pin & Bushing range and weighs 0.28 kg, measured on our scale. What it does at the joint The bushing carries the radial load while the pin turns inside it. It is the sacrificial part of the joint: it wears first, so the bore it sits in does not. It also sets the running clearance between pin and bore. How a bushing wears Clearance grows and the bore goes oval, which shows up as slop and misalignment in the joint. Scoring and seizure from poor lubrication or dirt getting in. Edge loading and fatigue when the pin is misaligned or the bushing was pressed in out of round. Fretting and corrosion at the press-fit surface. When to replace it Check the joint at scheduled service for measurable clearance and scoring. Keep the grease path clear and the seals that hold the lubricant in place intact. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit, not on its own.
Frequently Asked Questions
What should I send to check the fit before ordering?
Send the number from the old bushing and your machine's serial number. The serial number confirms the fit.
How long does shipping take?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.