
2347113443, 234-71-13443 Pin Komatsu
Description
The Komatsu 2347113443 pin, also written 234-71-13443, is a pivot pin: the shaft at the centre of a pinned joint, running inside a bushing so the linkage can swing without metal-on-metal contact between the structural members. What it does in the joint The pin carries shear load between the two linkage members and sets the running clearance of the joint together with its bushing. It is normally hardened and ground so that wear lands on the cheaper bushing, not on the pin. This one weighs 0.4 kg. Signs it needs replacing Scoring or a worn, ovalised surface, which opens up play in the joint A bent pin, or cracks from shock loading Pitting or corrosion where the surface layer has broken through Worn keeper plates or snap rings that let the pin walk out Check the pin for scoring, ovality and straightness whenever the joint is serviced. Replace it together with the mating bushing when either one is past its wear limit, because a new pin in a worn bushing wears out quickly. To confirm you are ordering the right pin, send us the number from the old one and a photo of it next to its bushing.
Frequently Asked Questions
How long does shipping take and what does it cost?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send you to check the fit before ordering?
Send the number from your old pin and a clear photo of it beside the mating bushing. We compare both against this pin before you order.