
2387351280, 238-735-1280 Pin Komatsu
Description
The 2387351280 pin is a Komatsu pivot pin, the shaft that sits inside a bushing at a pinned joint. It is also written 238-735-1280. It weighs 1.28 kg, measured net on our scale. How this pin wears A pivot pin is normally hardened and ground so that wear lands on the cheaper bushing rather than on the pin. Together the pin and bushing set the running clearance of the joint. When that clearance opens up, the joint starts to knock. Scoring and surface wear that enlarge the clearance Bending or shear fatigue after shock loading Corrosion and pitting where the surface layer has broken through Worn keeper plates or snap rings that let the pin walk out When to replace At service, check the pin for scoring, ovality and straightness, and check the retention hardware. Replace the pin together with its mating bushing when either one is past its wear limit. A new pin in a worn bushing will not close up the clearance. To check you have the right pin, send us the number on your old one plus its measured length and diameter.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.