
23B1512560, 23B-15-12560 Pin Komatsu
Description
The Komatsu 23B1512560 pin, also written 23B-15-12560, is a pivot pin: a cylindrical shaft that carries shear load between two linked members while letting them swing. It weighs 0.38 kg, measured on our scale. How this pin wears The pin is the hard counter-surface to its bushing. It is normally hardened and ground so that wear lands in the cheaper bushing, and the pair together sets the running clearance of the joint. Scoring and surface wear that opens up the joint clearance Bending or shear fatigue after shock loading Corrosion and pitting once the protective surface layer is breached Worn keeper plates or snap rings letting the pin walk out What to check at service Look at the pin for scoring, ovality and straightness. Keep the joint lubricated and the retention hardware in good shape. Replace the pin when it exceeds the wear limit.
Frequently Asked Questions
What should I send to check this pin before ordering?
Send the number 23B1512560 or 23B-15-12560, photos of the old pin, and the machine's serial number so we can confirm the match.
Should I replace the bushing at the same time as the pin?
Replace the pin together with its mating bushing when either one exceeds the wear limit, because the two set the joint clearance as a pair.
How is this part shipped and how long does delivery take?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.