Marketplace of Heavy Machinery Spare Parts

23B1522510, 23B-15-22510 Pin Komatsu

$186.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 23B1522510
Availability: In Stock
A Komatsu pivot pin that carries load between two linked members and turns inside a bushing, filed with our transmission and drive parts.

Description

The Komatsu 23B1522510 pin, also written 23B-15-22510, is a pivot pin: a cylindrical shaft that forms the axis of a pinned joint and mates with a bushing. What it does in the joint The pin takes the shear load between the two linked members while the joint turns. Together with its bushing it sets the running clearance of the joint. It is normally made hard and ground so that wear ends up in the bushing, which is the cheaper part to replace. We file this one with the transmission and drive parts. It weighs 0.18 kg. How a pin wears Scoring and surface wear, which open up the joint clearance Bending or shear fatigue after shock loading Corrosion and pitting once the surface layer is broken Worn keeper plates or snap rings, which let the pin walk out When to replace it At service, check the pin for scoring, ovality and straightness. Keep the joint lubricated and the retaining hardware in good shape. Replace the pin together with its bushing when either one is past its wear limit, because a new pin in a worn bushing wears out quickly. Send us the number from your old pin and the bushing it runs in, and we will check it against 23B1522510.

Frequently Asked Questions

Should I replace the bushing when I replace the pin?

Yes, if the bushing is worn. A pin and its bushing wear as a pair, so replace them together when either one exceeds its wear limit.

How long does shipping take and what does it cost?

Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and are in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products