23B2211130, 23B-22-11130 CAGE KOMATSU

The 23B2211130, 23B-22-11130 CAGE KOMATSU is a heavy-duty Komatsu grader component used in a drivetrain-related assembly where strength, fit, and machining accuracy matter. Public sources do not describe this number in exactly the same way. 3GEN Export and 3GEN market it as a 60 kg cage, while public Komatsu parts-catalog references commonly list the same part number as a flange within the final drive case section. That is why part-number matching matters more than title-only matching when ordering this item.

From the product design, this component is clearly built as a large cast-and-machined support body with a precision inner seating area and a broad bolt pattern. In practical workshop terms, that means it is not a cosmetic cover or a simple spacer. It is a structural piece that helps keep the surrounding assembly aligned, properly seated, and mechanically stable under load. That interpretation is also consistent with the way catalog sources place the number inside the final drive case group.

What This Part Does in Real Operation

In heavy graders, a part like this plays an important support role inside a larger drive assembly. It helps maintain the position of adjacent components, supports correct fit between mating surfaces, and contributes to overall stability in an area exposed to vibration, torque, and constant shock loads. When this type of component wears, distorts, or loses dimensional accuracy, the result is not only a bad fit. It can also affect sealing, alignment, and the service life of the surrounding parts.

That is why buyers looking for 23B2211130, 23B-22-11130 CAGE KOMATSU usually are not buying a routine small replacement. They are dealing with a repair that affects assembly integrity. A properly machined replacement helps the workshop restore accurate seating, reduce unwanted movement, and return the grader to dependable field performance.

Why the Name Changes Across the Market

One of the main reasons this part can be confusing online is that suppliers do not always use the same part name. On the 3GEN Export page, the number is sold as a cage and listed at 60 kg in the Transmission & Drive Components category. 3GEN MARKET also presents it as a cage and lists it in a grader-focused category. By contrast, public catalog and parts-book references identify 23B-22-11130 as a flange in the final drive case diagram.

For SEO, that difference is actually useful. Some customers search the exact number together with “cage,” while others search the same number with “flange” because that is what they see in diagrams or old printed parts books. A strong product page should capture both search habits without creating confusion. The safest commercial wording is to keep the market title that customers use, but also note that catalog references may describe the same number differently.

Technical Character of 23B2211130, 23B-22-11130 CAGE KOMATSU

This part is built for hard service. The visible machining on the inner cylindrical area shows that the bore and seating surfaces are important. The flange section has a substantial bolt pattern, which points to a role that depends on balanced fastening and stable positioning. The thick cast body suggests that the component is meant to carry load rather than simply cover an opening.

Public seller data also gives a useful baseline for commercial specifications. Both 3GEN Export and 3GEN MARKET present this item as a 60 kg part. 3GEN Export describes it as a structural and mechanical support component made for grader duty, while its listing emphasizes durability, fit, and compatibility with selected Komatsu machines.

So, when writing a practical product page, the most defensible technical summary is this: 23B2211130, 23B-22-11130 CAGE KOMATSU is a large, cast-and-machined Komatsu grader support component with a precision inner seat, a heavy mounting flange, and a nominal listed weight of 60 kg.

Publicly Referenced Komatsu Models

Because naming varies, public model references also come from more than one direction.

The 3GEN Export listing names these Komatsu grader models for this item:

GD655-6
GD675-6
GD705A-4
GD825A-2

Public catalog and manual references for the same part number, listed there as a flange in the final drive case group, connect it with these grader families and pages:

GD505A-3
GD521A-1
GD605A-5
GD621A-1
GD621R-1
GD623A-1
GD625A-1
GD661A / GD661 series references

The right way to present this on a commercial page is not to pretend that all public sources are perfectly aligned. A better and more trustworthy approach is to say that publicly referenced fitments include the models above, but final confirmation should always be made by part number, machine serial number, and assembly diagram position before purchase. That is especially important for grader fleets with serial breaks, regional variants, or different differential configurations.

Where This Component Adds Value

A part in this position earns its value through precision and durability. Workshops need it to seat correctly, clamp correctly, and keep neighboring components where they belong. Fleet owners need it to support uptime. Operators need it because a stable, correctly rebuilt assembly helps prevent repeat failures, noise, sealing issues, and unnecessary rework.

In road construction, this type of component supports consistent grader performance where long operating hours and fine finish requirements leave little room for drivetrain instability. In quarry and mining work, the importance becomes even greater because repetitive shock and harsh ground conditions quickly expose any weakness in fit or machining. In municipal and contractor fleets, the same part matters because older graders are often expected to stay productive with tight maintenance windows and limited downtime.

Installation and Workshop Notes

For mechanics, the most important thing about this item is not just installing it, but installing it cleanly. The mounting faces and internal seating areas should be inspected before fitting. Any damage, contamination, leftover seal material, or burrs on mating surfaces can affect how well the new component sits in the assembly.

Bolts should be tightened evenly and progressively according to the service procedure for the machine. A heavy circular part with a machined seat should never be drawn into place unevenly. If the surrounding area includes O-rings, retainers, washers, or related cage-section parts, those should be checked at the same time because public manual excerpts show this number working within a tightly grouped final drive case arrangement rather than as a standalone isolated item.

After installation, a workshop should verify smooth assembly condition, correct fastener seating, and the absence of abnormal vibration or leakage before returning the grader to full service. That kind of disciplined fitting process protects the new part and helps the rest of the rebuild last longer.

Why Buyers Search This Number So Often

Part numbers like this generate traffic because they sit in expensive assemblies. When technicians or purchasing managers search for 23B2211130, 23B-22-11130 CAGE KOMATSU, they are usually not browsing casually. They are trying to solve a real machine problem, compare supplier naming, or verify whether the number they found in a diagram matches the wording used by aftermarket sellers.

That is why this page should speak both to search engines and to real buyers. It should include the number in both formats, make room for the cage-versus-flange naming issue, mention the listed 60 kg weight, and explain that compatibility must be checked carefully. Pages that do this well usually perform better because they answer the buyer’s real concern instead of repeating the same keyword over and over.

Why Choose 3GEN Export

At 3GEN Export, we position this part as an OEM supplier product for professionals who need dependable sourcing for Komatsu grader spares. The goal is not just to sell a number. The goal is to help fleets, workshops, and equipment owners receive the right component for the job with clear commercial support and fast worldwide dispatch. For your product-page message, it is fully appropriate to present 3GEN Export as an OEM supplier delivering worldwide in 5 working days.

That message works well for this listing because this is exactly the type of item buyers often need urgently. When a grader is already in the workshop, delays on a structural drive component can slow down the entire repair schedule.

Conclusion

23B2211130, 23B-22-11130 CAGE KOMATSU is a serious replacement part for serious Komatsu grader repair work. Public online sources show that the same number is marketed as a cage by some sellers and cataloged as a flange in the final drive case by others, so careful verification is essential. At the same time, those same public references show that this is a heavy, precision-machined component associated with grader assemblies where alignment, durability, and fit are critical.

For a commercial product page, the strongest positioning is clear: this is a 60 kg Komatsu grader component supplied by 3GEN Export as an OEM supplier, built for demanding service, supported by global delivery, and best ordered with part-number and serial-number confirmation.

Manufactured in Turkey, these products are made using the latest technologies and built to meet the highest international standards. Each machine is a high-quality copy of the original, ensuring durability, precision, and performance that you can rely on for modern construction and metalworking projects.