
23B2231840, 23B-22-31840 Shaft Komatsu
Description
The Komatsu 23B2231840 shaft (also written 23B-22-31840) is a rotating drive shaft that passes torque between the parts mounted on its journals. It belongs to the final drive case group of parts and weighs 10.26 kg, measured on our scale. How this kind of shaft wears A shaft takes bending and twisting loads at the same time. Wear shows up in a few predictable places: Fatigue cracks at keyways and shoulders, where stress concentrates. Wear and scoring on the journals where bearings and seals run. Spline or keyway deformation after shock loads. Corrosion pitting, which can start a fatigue crack. When to replace Check the journals, keyways and splines whenever the assembly is open. Replace the shaft if you find a crack, scored seal surfaces or deformed splines. Vibration that comes back after alignment and balance are corrected also points to the shaft. Scored seal-running surfaces will wear a new seal out quickly, so do not refit a seal over them.
Frequently Asked Questions
What should I send you to check this shaft against my old one?
Send the part number from your old shaft, clear photos of both ends and the splines or keyway, and the machine's serial number.
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment goes by air with tracking. Orders are prepared in 1–2 days and are in transit 4–5 days, typically 5–7 days door-to-door.