
23B2711250 , 23B-27-11250 PIN KOMATSU
Description
The Komatsu 23B2711250 pin is a pivot pin that forms the axis of a pinned joint in the front axle housing, also written 23B-27-11250. Where it sits This pin belongs to the front axle housing group, including the version without the steering cylinder guard. It works with a bushing to make a joint that turns or oscillates under load. How this kind of pin wears A pivot pin carries shear load between two linked members. It is normally hardened and ground so that wear lands on the cheaper bushing, not on the pin. These are the faults to look for: Scoring or surface wear that opens up the joint clearance Bending, or shear fatigue after shock loading Corrosion and pitting where the surface layer has broken through Worn keeper plates or snap rings that let the pin walk out When to replace At service, check the pin for scoring, ovality and straightness, and check the retention hardware. Replace the pin when it is scored, out of round or bent, or when play in the joint has grown past the wear limit. Keep the joint lubricated. Send us the number stamped on your old pin and the machine's serial number, and we will confirm it is the right one.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
Should I replace the bushing when I replace this pin?
Yes. A pivot pin and its mating bushing wear as a pair, so replace them together when either one exceeds its wear limit.