Marketplace of Heavy Machinery Spare Parts

23B7072190, 23B-70-72190 BUSHING KOMATSU

$600.00
Brand: Komatsu
Category: Transmission & Drive Components
Part Number: 23B-70-72190
Availability: In Stock
A Komatsu plain bearing that lines a bore and gives two moving parts a replaceable, low-friction wear surface.

Description

The Komatsu 23B7072190 bushing is a cylindrical plain bearing that lines a bore, giving a replaceable wear surface between two moving parts. It weighs 0.86 kg. What it does The bushing carries the radial load, and sometimes axial load, while the joint turns or slides. It takes the wear so the more expensive part it sits in does not, and it sets the running clearance of the joint. It is a serviceable part, made to be replaced. Signs it needs replacing Slop in the joint or visible misalignment, which usually means the bore has worn oval and clearance has grown. Scoring on the bore, or a joint that has seized. This points to poor lubrication or dirt getting in. Uneven wear at the edges, which shows the mating pin is misaligned or the bushing was pressed in out of round. Fretting or corrosion at the press-fit surface. Fitting and care Check the bushing for clearance and scoring at scheduled service. Keep the grease path clear and the seals that hold the lubricant in place intact. When clearance goes past the equipment maker's wear limit, replace the bushing together with its pin as a matched set, not on its own. Send us the part number from your old bushing and the machine serial number, and we will check the match before you order.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products