Marketplace of Heavy Machinery Spare Parts

2A8-70-13360 BUSHING

$154.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 2A8-70-13360
Availability: In Stock
Replaceable wear liner for a pin joint in the arm and bucket link assembly.

Description

The Komatsu 2A8-70-13360 bushing is a cylindrical plain bearing that lines a bore and gives a pivot pin a low-friction, replaceable wear surface. It is also written 2A87013360. Where it sits This bushing belongs to the arm, bucket link assembly. It works at a pin joint, carrying radial load while the pin turns, and it sets the running clearance of that joint. How it wears A bushing is a sacrificial part. Typical failure modes are: Bore wear that grows the clearance and leaves slop and misalignment in the joint Scoring and seizure from poor lubrication or dirt getting in Edge loading and fatigue where the pin is misaligned or the bushing was pressed in out of round Fretting and corrosion at the press-fit seat When to replace Check the joint at scheduled service for play and scoring, and keep the grease path clear and the seals intact. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit. Changing the bushing alone leaves a worn pin running in a new bore. To confirm the fit, send us the number from your old bushing and the machine's serial number.

Frequently Asked Questions

How long does shipping take and is it tracked?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products