
2A87014370, 2A8-70-14370 BUSHING KOMATSU
Description
The Komatsu 2A8-70-14370 bushing, also written 2A87014370, is a cylindrical plain bearing pressed into a bore so the pivot pin runs on a replaceable surface instead of on the housing itself. Where it sits This bushing belongs to the arm, bucket link assembly. It is a sacrificial part: it takes the wear so the more expensive pin and housing do not have to. Signs it needs replacing Slop in the joint, which means the bore has worn oval and clearance has grown Scoring on the bore or the pin, usually from poor lubrication or dirt getting in Uneven wear on one edge, which points to a misaligned pin or a bushing pressed in out of round Fretting or corrosion marks where the bushing meets its seat Replacing it Check the grease path is clear and the seals that hold the lubricant are intact before fitting a new bushing, or the new one will score the same way. When clearance goes past the equipment maker's wear limit, replace the bushing together with its pin, not on its own. Send the machine's serial number and the part number from your old bushing, and we will confirm the match before you order.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.