
3128078548, 3128 0785 48 HOLDER ATLAS COPCO
Description
3128078548, 3128 0785 48 HOLDER ATLAS COPCO If your drilling rig’s moving assemblies are only as reliable as the way its hoses, covers, and protection profiles are guided, then a small component like a holder becomes a big deal. The 3128078548, 3128 0785 48 HOLDER ATLAS COPCO is a right-side holder/support element used on Atlas Copco / Epiroc drilling equipment, designed to keep protective components aligned, stable, and protected from vibration-driven wear. In the field, misalignment is expensive: rubbing hoses, chafing covers, premature cracking of protective profiles, and an increasing maintenance cycle that keeps the machine out of production. The 3128078548 HOLDER ATLAS COPCO is built to reduce those risks by providing a rigid mounting base and a wear/contact surface (the yellow pad visible in the product images) that helps manage friction and positioning in an area exposed to dust, shock, and constant motion. This page explains what the part does, why its design matters, where it’s commonly used, how to recognize failure, and how to install it properly, so you can keep uptime high and protect the systems around it. What the 3128 0785 48 HOLDER ATLAS COPCO does on a drill rig On many surface and underground drilling rigs, multiple subsystems move together, feed systems, cable/hose management, protective covers, and profile-guided components. Over time, vibration, impact pulses, and micro-movements cause contact points to wear. A holder/support part like the 3128 0785 48 HOLDER ATLAS COPCO is typically installed to: Support and position a cover, guard, or profile assembly on the rig Provide a stable “reference” mounting surface so adjoining parts stay aligned Reduce friction damage where a cover/profile contacts another surface (via the wear pad) Help prevent loosening and deformation by using slotted mounting holes for adjustment Aftermarket listings commonly describe this component as a right-side holder/support for Atlas Copco / Epiroc equipment. Even if the holder itself looks “simple,” it acts like a protective interface: it helps prevent collateral damage to hoses, protective profiles, and surrounding assemblies, damage that can lead to leaks, electrical faults, or sudden downtime. Visual design cues from the product images From the provided images, this part appears to be an aluminum (or light-alloy) holder block with: Two elongated slotted mounting holes (for alignment/positioning during installation) A mounted yellow wear strip/pad (contact surface to reduce abrasion and manage friction) Fastener/pin points securing the wear pad to the holder body This design is consistent with holder/support components used on drilling rigs to guide or support protective profile assemblies. Part numbers and search formats you should use To capture all the ways buyers search, use both number styles throughout your page: 3128078548 HOLDER ATLAS COPCO 3128 0785 48 HOLDER ATLAS COPCO These two formats help your listing rank whether the customer searches with spaces or without them. Common applications and compatible equipment Online parts listings associate the 3128078548, 3128 0785 48 HOLDER ATLAS COPCO with Atlas Copco / Epiroc drilling rigs and related equipment families. For example: The part is presented as a holder/support used on Epiroc drill rig assemblies. Some listings reference compatibility/applications including Boomer and Boltec series and surface rig lines, depending on configuration. A ROC D55 parts context also appears in publicly visible parts lists that include this part number. A product listing also references applications such as Epiroc Boltec 235 , Boomer 104 , and Roc D55 . Important compatibility note Rigs often have multiple revisions by serial range, build year, and option package. So treat model lists as guidance, your final confirmation should be made by: Your machine’s serial number The parts book / exploded diagram for the assembly Cross-checking the replaced part number stamped/marked on the old component If you want, you can paste the rig model + serial range (or assembly diagram screenshot) and I’ll help you confirm placement and related parts (profiles, fasteners, pads). Why this holder matters more than most buyers think When a holder is worn or misaligned, the damage rarely stays “local.” You start seeing secondary problems: Protective covers vibrating loose or drifting out of position Wear lines on profiles and guides that should last far longer Hose/cable routing that changes subtly, leading to rubbing and pinching Fasteners that keep backing out because the surface is no longer stable Replacing the 3128 0785 48 HOLDER ATLAS COPCO on time helps protect higher-value components around it, especially in harsh drilling conditions where dust, water, and vibration accelerate wear. Material and engineering intent Most holder/support parts in this category are engineered with two goals: Rigid positioning The base must hold alignment under vibration and repeated shock loads. Controlled contact The contact surface should be sacrificial and replaceable, so it wears instead of the more expensive surrounding parts. The yellow strip seen on this 3128078548 HOLDER ATLAS COPCO is consistent with a wear pad concept, helping reduce metal-to-metal contact and smoothing motion where a profile/cover meets the holder. Technical details and specifications Because Atlas Copco / Epiroc configurations vary, some specifications should be verified against your machine. Still, a professional product page should include practical, buyer-friendly details: Technical overview (buyer-ready) Product name: 3128 0785 48 HOLDER ATLAS COPCO Alternative format: 3128078548 HOLDER ATLAS COPCO Function: Holder / Support, Right-side (mounting and guidance support) Equipment category: Atlas Copco / Epiroc drill rig assemblies Mounting type: Slotted holes (adjustable alignment) Contact surface: Wear pad/strip (yellow) Approximate weight: ~1.0 kg (listing reference) Specifications table Specification Detail Part Number (no spaces) 3128078548 Part Number (spaced) 3128 0785 48 Part Name HOLDER / Support, Right Primary Use Drill rig support/holder for profile/cover guidance Mounting Slotted bolt holes for adjustment Wear Interface Yellow wear pad/strip (anti-abrasion contact surface) Approx. Weight ~1.0 kg Brand Category Atlas Copco / Epiroc drilling equipment If you want, I can also format this as a WooCommerce “Additional Information” block and a short bullet summary for the top of the page. Symptoms that indicate you should replace the holder Replace the 3128 0785 48 HOLDER ATLAS COPCO if you see any of the following: The wear pad surface is deeply grooved, chipped, or uneven Covers/profiles no longer sit square and begin rubbing on edges You can move the holder by hand (loose mounting or elongated wear) Fasteners keep loosening even with correct torque and thread-lock practices New protective profiles wear prematurely after installation A good habit is to inspect this area during routine maintenance, especially if the rig is used in abrasive rock dust or high-vibration drilling cycles. Installation guide for 3128078548 HOLDER ATLAS COPCO Below is a practical installation workflow that fits most drill-rig holder/support parts of this type. Tools typically needed Correct socket/hex set for the mounting fasteners Torque wrench (recommended) Threadlocker (medium strength, if specified by your maintenance standard) Cleaning spray and lint-free cloth Straight edge or alignment reference (optional but helpful) Step-by-step installation Lock out and secure the machine Ensure the rig is powered down and secured according to site safety procedure. Document the original position Take a quick photo of the holder orientation and the alignment of the attached cover/profile. Those slotted holes exist for a reason, your current alignment is your reference. Remove the old holder Loosen the mounting bolts and remove the old 3128078548 HOLDER ATLAS COPCO . If the part is seized due to dust/corrosion, clean and carefully free it without damaging the mounting surface. Inspect the mounting surface Clean the base area. Look for burrs, dents, or misalignment that may have caused the old holder to wear unevenly. Dry-fit the new holder Position the 3128 0785 48 HOLDER ATLAS COPCO and hand-tighten bolts. Keep it adjustable until alignment is confirmed. Align the cover/profile contact Set the holder so the wear pad contacts the intended surface evenly. Avoid edge-loading the pad, which accelerates wear. Torque fasteners to spec Use the correct torque specs for your assembly. If your standard procedure requires threadlocker, apply it appropriately. Functional check Slowly cycle the moving assembly (where safe and possible). Verify there’s no rubbing, binding, or unexpected noise. Re-check after initial operation After a short operating period, re-check fasteners and alignment, especially in high-vibration areas. Maintenance best practices to extend service life To get the most life out of the 3128078548, 3128 0785 48 HOLDER ATLAS COPCO : Keep the area clean (packed dust becomes abrasive paste) Inspect the wear pad surface regularly Address vibration sources early (loose guards, worn bushings, misrouted hoses) Avoid over-tightening bolts in slotted mounts (can distort alignment) Replace associated profiles/guards if they are already damaged, new holders can’t compensate for bent or warped components Related parts buyers often replace together On drill rigs, holder components commonly work alongside: Holder profiles (aluminum profile rails) Hose drums / cable routing components Fasteners and locking elements Wear pads, strips, or guide inserts This is useful for upsell bundles and for reducing repeat shipping. Why order from 3GEN Export When you’re sourcing a precision-support component like the 3128 0785 48 HOLDER ATLAS COPCO , you’re not just buying metal, you’re buying alignment, reliability, and fewer shutdowns. 3GEN Export supplies heavy machinery spare parts as an OEM supplier , supporting drilling operations that can’t afford downtime. We ship worldwide with delivery in 5 working days , so you can restore performance quickly and keep your rig productive. If you’re ordering multiple related parts (holder + profile + fasteners), share your list and I’ll help you build a complete kit to reduce delays and repeat freight. Frequently asked questions Is this a left or right holder? This part is commonly described as a right-side holder/support . If you’re unsure, compare your removed part orientation or share a photo of the installation location. Which rigs use the 3128 0785 48 HOLDER ATLAS COPCO? Public listings reference Atlas Copco / Epiroc drill rigs and applications including Boomer/Boltec and Roc D55 contexts, depending on configuration and parts book revision. Final confirmation should be done by serial range and parts book. What is the weight? A published listing references ~1.0 kg for this item. (If you need exact packed shipping weight for freight quotes, tell me your destination and quantity and I’ll help you estimate packaging weight too.) Manufactured in Turkey, these products are made using the latest technologies and built to meet the highest international standards. Each machine is a high-quality copy of the original, ensuring durability, precision, and performance that you can rely on for modern construction and metalworking projects.