
3T1162 Bushing Caterpillar
Description
The 3T1162 bushing is a Caterpillar plain bearing, a cylindrical sleeve that lines a bore and gives a pivot pin a low-friction, replaceable wear surface. It weighs 22.37 kg, so handle it with lifting gear and fit it with a press, not a hammer. What it does at the joint The bushing carries the radial load of the joint while the pin turns or slides inside it. It also sets the running clearance. It is built to wear first, which protects the more expensive pin and housing. Signs it needs replacing Slop in the joint, which comes from the bore wearing oval and the clearance growing. Scoring on the bore, usually from poor lubrication or dirt getting in. Uneven wear along the edges, which points to a misaligned pin or a bushing pressed in out of round. Fretting or corrosion at the press-fit seat. Fitting notes Keep the grease path clear and the seals that hold lubricant in place intact. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit. A new bushing on a worn pin wears out quickly. Send us the machine's serial number to confirm the fit before you order.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.