Marketplace of Heavy Machinery Spare Parts

421-46-11741 SPACER

$212.00
Brand: Komatsu
Category: Transmission & Drive Components
Part Number: 421-46-11741
Availability: In Stock
Sets a fixed distance between two components in the front frame hinge pin area of a Komatsu machine.

Description

The Komatsu 421-46-11741 spacer is a machined ring or block that sets a fixed distance between two components on a shaft or bolted joint. This one belongs to the front frame and center hinge pin group, where the frame sections pivot on the hinge pins. What it does here A spacer positions the parts on either side of it and carries clamp load across the stack. Its faces must stay parallel and its length must stay within tolerance, or the clearances the joint was designed around change. Signs it needs replacing Worn or fretted faces, which shorten the stack Deformation after over-torquing Corrosion bonding the spacer to the shaft or bore A spacer of the wrong length disturbs bearing preload, and that usually shows up later as bearing or gear damage. Keep each spacer in its original position when you take the joint apart, and check the faces for fretting before you reuse it. Never pick a replacement by eye. To confirm the fit before ordering, send us the machine's serial number along with the part number.

Frequently Asked Questions

How long does delivery take?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products