
4217011261, 421-70-11261 BUSHING KOMATSU
Description
This Komatsu 421-70-11261 bushing is a cylindrical plain bearing pressed into a pivot bore, so the pin turns against a replaceable wear surface and not against the linkage itself. Where it sits The parts catalogue places this bushing in the boom, bell crank and link assemblies, and in the lift arm and bell crank assemblies. It is a joint part, not a structural one. Because it takes the wear, it is the part you change when the pivot gets loose. How it wears The bore ovalises, which shows up as slop and misalignment in the joint. Poor lubrication or dirt getting in scores the surface and can seize the pin. A misaligned pin, or a bushing pressed in out of round, loads the edges and cracks them through fatigue. Fretting and corrosion attack the press-fit seat. When to replace Check the pivot at scheduled service for play and scoring, and keep the grease path clear and the seals intact. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit. Changing it alone leaves a worn pin chewing up the new surface.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send you to confirm this is the right bushing?
Send the machine's serial number along with the part number you are working from. We answer enquiries within 24 hours.