
423-46-42330 BUSHING
Description
The Komatsu 423-46-42330 bushing is a cylindrical plain bearing that lines a bore, giving a low-friction, replaceable wear surface between a pivot pin and its housing. Where it sits Our parts catalogue places this bushing in hinge pin assemblies, including a frame hinge pin group. It is a sacrificial part. It carries the radial load of the joint and takes wear in place of the more expensive host component. How a bushing wears The bore goes oval and the joint develops slop and misalignment. Poor lubrication or dirt getting in scores the surface and can seize the joint. A misaligned pin or an out-of-round press fit loads the edges and leads to fatigue. Fretting and corrosion attack the press-fit seat. When to replace it Check the bushing at scheduled service for measurable clearance and scoring. Keep the grease path clear and the seals intact, because they hold the lubricant in. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit. Changing it on its own leaves a worn pin running in a new bore. Send us the number on your old bushing and the machine's serial number, and we will confirm the match before you order.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.