
42N-856-1230 PIN
Description
The Komatsu 42N-856-1230 pin is a hardened cylindrical shaft that forms the axis of a pinned joint and runs inside a bushing. It is also written 42N8561230. Where it sits This pin appears in boom assemblies, including a backhoe boom. It passes shear load between the linkage members while the joint swings. How this kind of pin wears The pin is hardened and ground so that wear concentrates in the cheaper bushing. Watch for these problems: Scoring and surface wear that open up the joint clearance Bending or shear fatigue after shock loading Corrosion and pitting where the surface layer has broken through Worn keeper plates or snap rings that let the pin walk out When to replace Check the pin for scoring, ovality and straightness at service, and keep the joint greased and the retaining hardware in good order. When either the pin or its bushing goes past the wear limit, replace them together. A new pin in a worn bushing wears out quickly. To confirm the right pin, send us the machine's serial number along with the diameter and length of the old pin.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and goes by air with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.