Marketplace of Heavy Machinery Spare Parts

569-40-61320 BUSHING

$260.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 569-40-61320
Availability: In Stock
Replaceable plain-bearing bushing that lines the bore at a pivot pin joint, in the Komatsu front axle lever and main frame assemblies.

Description

The Komatsu 569-40-61320 bushing is a cylindrical plain bearing that lines a bore at a pivot pin joint, also written 5694061320. It sits in the front axle lever and main frame assemblies. What it does The bushing takes the wear so the pin and the housing do not. It carries the radial load, lets the joint turn, and sets the running clearance. Signs it needs replacing Slop or play at the joint, which usually means the bore has worn oval. Scoring or signs of seizure, often from poor lubrication or dirt getting in. Uneven wear on one edge, which points to a misaligned pin or a bushing pressed in out of round. Fretting or corrosion at the press-fit surface. Replacing it Replace the bushing as a matched set with its pin once clearance goes past the machine maker's wear limit. Changing the bushing alone leaves a worn pin chewing up the new part. Keep the grease path clear and the seals intact so the new bushing does not score.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

What should I send to check the fit before ordering?

Send us the part number 569-40-61320 together with your machine's model and serial number. The serial number is what confirms the fit.

Loading product...

Related Products