Marketplace of Heavy Machinery Spare Parts

1543074130, 154-30-74130 Bushing Komatsu

$660.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 1543074130
Availability: In Stock
A replaceable plain-bearing bushing from Komatsu that lines a pin bore in the track frame and track guard area.

Description

The Komatsu 1543074130 bushing is a cylindrical plain bearing that lines a bore and takes the wear between a pivot pin and its housing, so the housing does not wear instead. It is also written 154-30-74130. Where it sits Our catalog links this bushing to the track frame, track guard and roller guard groups. It weighs 0.94 kg, measured on our own scale. How this kind of bushing wears A bushing is the sacrificial part of a pin joint. It carries the radial load, sets the running clearance and is made to be replaced. These are the usual ways it fails: The bore wears oval, which gives joint slop and misalignment. Scoring or seizure from poor lubrication or dirt getting in. Edge loading and fatigue when the mating pin is misaligned or the bushing was pressed in out of round. Fretting and corrosion at the press-fit surface. When to replace it Check at scheduled service for measurable clearance and scoring. Keep the grease path clear and the seals that hold the lubricant in good condition. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit. Fitting a new bushing on a worn pin brings the slop back quickly.

Frequently Asked Questions

What should I send to confirm this bushing is the right one?

Send us the part number from your old bushing and your machine's serial number, and we will check it against this part before you order.

How long does shipping take and does it cost anything?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products