
1775011160, 177-50-11160 Bushing Komatsu
Description
The 1775011160 bushing from Komatsu is a cylindrical plain bearing that sits in the equalizer bar assembly. It gives the pivot pin a replaceable wear surface. Komatsu also writes the number 177-50-11160. Net weight is 2.48 kg, measured on our scale. What it does in the equalizer bar A bushing carries the radial load at a pin joint while letting the joint turn. It takes the wear so the pin and the housing do not. It also sets the running clearance of the joint. Signs it needs replacing Slop in the joint, which comes from the bore going oval as it wears Scoring or seizure, usually from poor lubrication or dirt getting in Uneven wear at the bushing edges, which points to a misaligned pin or a bushing pressed in out of round Fretting or corrosion at the press-fit surface Fitting it Check the joint for measurable clearance and scoring at scheduled service. Keep the grease path clear and the seals that hold the lubricant in place. Replace the bushing together with its pin once clearance goes past the machine maker's wear limit. A new bushing on a worn pin wears out quickly.
Frequently Asked Questions
What should I send to check this bushing before ordering?
Send the machine's serial number and the number from the bushing you are taking out. The serial number confirms the fit.
How is this bushing shipped and how long does delivery take?
Shipping is free and goes by air, with a tracking number emailed once the order is dispatched. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.