
17M2741230, 17M-27-41230 Gear Komatsu
Description
The Komatsu 17M2741230 gear is a toothed wheel that passes rotation and torque from one shaft to the next in the undercarriage and track group. It is also written 17M-27-41230. What we know about this part We weighed the gear on our own scale at 13.46 kg , net part weight. The photos on this page show the actual part. How a gear like this wears Tooth contact is where the damage starts. Typical failures are: Pitting and micropitting on the tooth surface from contact fatigue Cracks at the tooth root, and broken teeth after shock load Scuffing when the lubricant breaks down Wear and spalling on the hardened tooth surface When to replace Look at the tooth faces at each service. Pitting, scuffing or chipped teeth mean the gear is finished. Abnormal noise, or metal in the oil, is a reason to stop and inspect before the damage spreads. Replace meshing gears as a set, so the contact pattern stays correct and a new gear does not run against a worn one. Keep the lubricant at the correct grade and level, because oil breakdown is what scuffs teeth. Send us the number 17M2741230 and your machine's serial number, and we will confirm the match before you order.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send to check this gear before ordering?
Send the part number 17M2741230, your machine's serial number, and photos of the gear you are replacing. We compare them and confirm before you order.