
1955022170, 195-50-22170 Spacer Komatsu
Description
The Komatsu 1955022170 spacer is a machined ring or block that sets a fixed distance between two components on a shaft or bolted joint. It is also written 195-50-22170, and it belongs to the equalizer bar assembly group. Weight Net part weight is 0.58 kg , measured on our scale. What a spacer does It holds bearings, gears and other elements at the right axial position and carries clamp load across the stack. Its faces must stay parallel and its length within tolerance, or the running clearances change. How it wears and when to replace it Worn or fretted faces shorten the stack. Over-torque can deform the spacer. Corrosion can bond it to the shaft or bore. A wrong-length substitute disturbs bearing preload. Check the faces for fretting whenever the joint is apart, and replace the spacer if you find it. Keep each spacer in its original position during disassembly. Never pick a replacement by eye, because a stack length error shows up later as bearing or gear failure. Before ordering, measure the length of your old spacer and send us the part number so we can compare.
Frequently Asked Questions
How long does delivery take and does it cost anything?
Shipping is free, goes by air and every order is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.