
2072752270, 207-27-52270 Spacer Komatsu
Description
The Komatsu 2072752270 spacer is a ring or block that sets a fixed distance between two components on a shaft or a bolted joint. It is also written 207-27-52270. Weight It weighs 0.1 kg, measured on our scale. What a spacer does and how it wears A spacer positions the parts on either side of it and carries clamp load across the stack. Its faces must stay parallel and its length must stay within tolerance, or the stack is no longer correct. Face wear or fretting shortens the stack. Over-torque can deform it. Corrosion can bond it to the shaft or bore. A spacer of the wrong length disturbs bearing preload. When to replace Check the faces for fretting whenever the joint is apart, and keep each spacer in its original position during disassembly. Do not choose a replacement by eye. A length error shows up later as bearing or gear failure. If you are unsure of the match, send us the number on your old spacer and the machine's serial number so we can confirm the part.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send so you can check the fit?
Send the part number you have and the machine's serial number. If the number on the old spacer is worn, a photo of the old spacer helps.