
3115600488, 3115 6004 88 Rotation Chuck Bushing Atlas Copco
Description
The 3115600488 rotation chuck bushing is an Atlas Copco plain bearing that lines a bore and gives a low-friction, replaceable wear surface between two moving parts. The number is also written 3115 6004 88. It weighs 1.0 kg. What it does in the joint A bushing carries radial load while the joint turns, and it sets the running clearance. It is built to wear so that the more expensive part it sits in does not. How it wears The bore goes oval and the joint gets slop and misalignment. Poor lubrication or dirt getting in scores the surface and can seize the joint. A misaligned pin, or a bushing pressed in out of round, loads the edges and leads to fatigue. Fretting and corrosion attack the press-fit surface. When to replace it Check for measurable clearance and scoring at scheduled service. Keep the grease path clear and the seals that hold the lubricant in good order. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit, because changing one without the other leaves the old wear in the joint.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send to check the fit before ordering?
Send the machine's serial number together with the part number 3115600488. The serial number confirms the fit.