
Atlas Copco Seal Kit - 3115 9170 91
Description
The Atlas Copco 3115917091 repair kit is a seal kit for bored pile equipment, used to renew the sealing elements in a joint that has been opened. It weighs 0.83 kg. What a seal does A seal closes the gap between a moving part and a stationary one. It keeps lubricant or hydraulic fluid in and keeps dirt and water out. Rotary lip seals ride on a shaft, and O-rings seat in a groove and seal by compression. How seals wear The elastomer hardens, cracks or takes a compression set with age and heat. Rotary seal lips wear, or the shaft gets grooved. An O-ring extrudes into the clearance gap under high pressure when there is no back-up ring. The elastomer swells or shrinks when it meets an incompatible fluid. When to replace Replace seals every time the joint is opened. Do not refit old ones. Before you fit new seals, check that the sealing surface and groove dimensions are within specification. Fit back-up rings where the pressure calls for them. Match the seal material to the fluid and temperature. The relevant standards are ISO 3601-1 for O-rings and ISO 6194-1 for rotary shaft lip seals.
Frequently Asked Questions
What should I send to confirm this seal kit is the right one?
Send us the part number 3115 9170 91 and the serial number of your machine. Add a note of which joint you are resealing, so we can check the kit before you order.
How long does shipping take and does it cost anything?
Shipping is free and every order ships by air with tracking. Orders are prepared in 1–2 days and are in transit 4–5 days, typically 5–7 days door-to-door.