
3128313618, 3128 3136 18 Bushing Atlas Copco
Description
The 3128313618 bushing from Atlas Copco is a cylindrical plain bearing that lines a bore, giving a pin a replaceable wear surface so the housing does not wear instead. It is also written 3128 3136 18. The catalogue weight is 2.0 kg. What a bushing does at the joint It carries radial load while the joint turns or slides, and it sets the running clearance of the pin. It is meant to wear, so the pin and the housing do not have to. How bushings wear The bore goes oval and the joint develops slop and misalignment. Poor lubrication or dirt getting in scores the surface and can seize the joint. A misaligned pin, or a bushing pressed in out of round, loads one edge and leads to fatigue. Fretting and corrosion attack the press-fit seat. When to replace Check at scheduled service for measurable clearance and scoring, and keep the grease path clear and the seals intact. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit. Changing the bushing alone leaves the worn pin to chew up the new one.
Frequently Asked Questions
How fast does it ship and does it come with tracking?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send you to check this is the right bushing?
Send the part number 3128313618 along with the machine's serial number. If you can measure the old bushing, its bore and outside size help us confirm the match.