Marketplace of Heavy Machinery Spare Parts

1233698, 123-3698 Plate Caterpillar

$286.00
Brand: Caterpillar
Category: Exhaust & Emission Systems
Part Number: 123-3698
Availability: In Stock
A flat steel plate that works as a wear surface, guide, shim base or mounting face.

Description

The Caterpillar 1233698 plate is a flat steel plate used as a wear, guide or mounting plate. A plate like this either takes sliding contact so the structure behind it does not, or spreads bolt loads across a mounting face. How this kind of plate wears A plate is the sacrificial part. It wears so the parent structure does not. Look for these signs: Sliding wear that thins the section below its limit Gouging or deformation from trapped debris Bolt holes that have stretched or worn, so the plate works loose Cracks at welds or edges under cyclic load When to replace it Measure the remaining thickness at service and keep the fasteners torqued. Replace the plate before the wear passes into the structure it protects, because a worn plate is far cheaper than a worn mounting face.

Frequently Asked Questions

How long does shipping take and what does it cost?

Shipping is free on every order. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door, and every order ships with tracking.

What should I send you to check this plate before ordering?

Send the number stamped or printed on the plate you are replacing and the serial number of your machine. If the old plate is still on, also measure its thickness and the spacing of its bolt holes.

Loading product...

Related Products