
2419265, 241-9265 Clamp Caterpillar
Description
The Caterpillar 2419265 clamp is a muffler clamp, a band or bolted fitting that secures a pipe or component and holds the line against movement. Where it sits and what it does This clamp belongs to the exhaust and emission side of the machine, on the muffler connection. Its job is to keep clamping force on the joint so the pipe does not work loose. The clamp type, band width and liner are matched to the joint, so use the same type as the one you are replacing. Signs it needs replacing The joint has loosened. Vibration and heat cycling wear down clamping force over time. The band is corroded or cracked. Renew a corroded band instead of re-tightening it. A clamp is missing from the line, which leaves the pipe free to chafe. Do not swap in a different clamp type. A worm clamp is not a V-band, and the wrong type can cut into the part it holds. Where the joint type calls for it, re-torque after the first heat cycles.
Frequently Asked Questions
What should I send to confirm this is the right clamp?
Send the part number from your old clamp, and the machine's serial number if you have it, and we will check it against this one before you order.
How long does shipping take?
Shipping is free and every order ships by air with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.