
6I2431 Seal Caterpillar
Description
The 6I2431 seal from Caterpillar is an elastomeric sealing element that closes the gap between a moving part and a stationary one. It holds lubricant or hydraulic fluid in and keeps dirt and water out. The catalogue weight is 0.14 kg. How this kind of seal wears Rotary lip seals ride on a shaft, and O-rings seat in a groove and seal by compression. Either type fails in a few familiar ways: The rubber hardens, cracks or takes a compression set with age and heat. On a rotary seal, the lip wears or the shaft gets grooved. An O-ring under high pressure extrudes into the clearance gap when there is no back-up ring. The rubber swells or shrinks because the fluid does not suit the material. When to replace Fit a new seal every time the joint is opened. Check that the sealing surface and the groove or bore are in good condition, and that the seal material suits the fluid and temperature. Where the pressure calls for one, fit a back-up ring. To check the match before you order, send us the number stamped on the old seal and the machine's serial number.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.