
1541271220, 154-12-71220 Shaft Komatsu
Description
The Komatsu 1541271220 shaft is a rotating drive component that transmits torque and rotary motion between the parts mounted on it. It weighs 8.17 kg. What this shaft does Gears, bearings, couplings and seals sit on its machined journals. Keyways or splines lock the mounted parts to the shaft, so it takes bending and twisting loads at the same time. Signs it needs replacing Cracks at keyways, shoulders or other sharp changes in section, which come from bending or torsional fatigue Wear or scoring on the journals where bearings and seals run Spline or keyway deformation, usually after shock loads Corrosion pitting, which can start fatigue cracks Checks when the assembly is open Look over the journals, keyways and splines whenever the assembly is apart. Keep the seal-running surfaces free of scoring. Vibration often points to an alignment or balance problem, so correct that before fitting a new shaft. Compare the journals, keyway and spline detail on your old shaft with the replacement before you order.
Frequently Asked Questions
What should I send you to check this shaft before I order?
Send the part number from your old shaft together with your machine's model and serial number. We answer enquiries within 24 hours.
How is this part shipped and how long does it take?
Shipping is free and every order goes by air with tracking. Orders are prepared in 1–2 days and are in transit 4–5 days, typically 5–7 days door-to-door.