
1545011135, 154-50-11135 Pin Komatsu
Description
The Komatsu 1545011135 pin is a pivot pin, the cylindrical shaft at the centre of a pinned joint, running inside a bushing. It weighs 13.61 kg. How this pin wears The pin takes shear load between the linkage members and sets the running clearance of the joint. It is normally hardened and ground so that wear lands on the cheaper bushing. Watch for these problems: Scoring and surface wear that open up the joint clearance Bending or shear fatigue after shock loading Corrosion and pitting once the protective surface is breached Worn keeper plates or snap rings that let the pin walk out When to replace it At service, check the pin for scoring, ovality and straightness, and keep the lubrication and retention hardware in good order. Replace the pin together with its mating bushing when either one is past its wear limit. A new pin in a worn bushing will not hold the clearance for long. Send us the old pin's number and the machine's serial number, and we will confirm the fit before you order.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door, and every order ships with tracking.