Marketplace of Heavy Machinery Spare Parts

1547814223, 154-78-14223 Bushing Komatsu

$158.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 1547814223
Availability: In Stock
A replaceable plain-bearing sleeve that lines the bore of a pivot joint and takes the wear so the pin and housing do not.

Description

The Komatsu 1547814223 bushing is a cylindrical plain bearing that lines a bore and gives a low-friction, replaceable wear surface between a pivot pin and its housing. It is also written 154-78-14223. The part weighs 0.84 kg. What it does at the pin joint The bushing carries the radial load while the joint turns, and it sets the running clearance. It is a sacrificial part: it wears so the pin and the housing do not. Signs it needs replacing Slop in the joint, caused by the bore wearing oval and the clearance growing. Scoring or seizure marks, which point to poor lubrication or dirt getting in. Uneven wear on one edge, which means the pin is misaligned or the bushing was pressed in out of round. Fretting or corrosion at the press-fit surface. Keeping the next one alive Check clearance and scoring at scheduled service, keep the grease path clear, and keep the seals that hold the lubricant in good condition. Send us the machine serial number and the number on your old bushing, and we will check them against this one before you order.

Frequently Asked Questions

Should I replace the bushing together with its pin?

Yes, replace the bushing as a matched set with its pin when the clearance goes past the equipment maker's wear limit. Changing the bushing alone leaves a worn pin running in a new bore.

How long does shipping take and does it cost anything?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products