
1757111520, 175-71-11520 Nut Komatsu
Description
The Komatsu 1757111520 nut is a threaded fastener that clamps parts together through the tension it builds in its thread. It weighs 0.09 kg. What a nut does in a joint Tightened onto a bolt or stud, the nut stretches the bolt slightly. That stretch is the preload, and the preload holds the joint together by friction. A nut that loses preload lets the joint move, and the bolt then takes loads it was never meant to carry. How a nut wears out Vibration loosens it, or the joint settles and the preload drops. Over-torque or a lower-grade replacement strips the thread or fails the nut. Galling or corrosion seizes the thread, so the nut is damaged when you remove it. When to replace it Replace a nut whose thread is stripped, galled, corroded or rounded off at the flats. Do not reuse one that has seized on its bolt. Fit the same thread form as the old nut and never a lower grade. Torque the joint to the machine's specification and re-check it after it has seated. Read the thread size and any grade marking off the old nut before you order, and have the machine's serial number ready.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send you to confirm this is the right nut?
Send the thread size and any grade marking on the old nut, along with the machine's serial number.