Marketplace of Heavy Machinery Spare Parts

1757121221, 175-71-21221 Pin Komatsu

$830.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 1757121221
Availability: In Stock
A pivot pin that forms the axis of a pinned joint and carries shear load between linkage members while the joint swings.

Description

The Komatsu 1757121221 pin is a pivot pin, a hardened shaft that sits inside a bushing and forms the axis of a pinned joint. It is also written 175-71-21221. The part weighs 8.59 kg. What it does in the joint The pin carries shear load between the two linkage members and lets the joint articulate. It is the counter-wear surface to the bushing. It is normally hardened and ground so that wear ends up in the cheaper bushing, not in the pin. Signs it needs replacing Scoring or surface wear that opens up the joint clearance A bent pin, or cracks from shock loading Pitting and corrosion where the surface layer has broken through A pin that works its way out because the keeper plates or snap rings are worn Replacing it Check the pin for scoring, ovality and straightness at service. Replace it together with the mating bushing when either one is past its wear limit, because a new pin in a worn bushing wears out fast. Keep the joint lubricated and renew worn retention hardware at the same time.

Frequently Asked Questions

What should I send to check the fit before ordering?

Send us the part number 1757121221 and your machine's serial number. If you have the old pin, include its measurements too.

How long does shipping take and does it cost anything?

Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products