
17A2741140, 17A-27-41140 Shaft Komatsu
Description
The Komatsu 17A2741140 shaft is a rotating transmission and drive component that carries torque between the parts mounted on it. It weighs 97.98 kg, so plan lifting gear when you handle it. What this shaft does Gears, bearings, couplings and seals sit on its machined journals. Keyways or splines lock the mounted parts to the shaft, and the shaft has to take both bending and twisting loads while it turns. Signs it needs replacing Cracks at keyways, shoulders or other sharp changes in section, which point to fatigue Wear or scoring on the journals at bearing and seal positions Spline or keyway deformation, usually after shock loads Corrosion pitting, which can start fatigue cracks Checks when the assembly is open Inspect the journals, keyways and splines while the assembly is apart. Keep the seal-running surfaces free of scoring. Vibration in service usually means an alignment or balance problem that needs correcting, or the new shaft will wear the same way.
Frequently Asked Questions
How is this shaft shipped and how long does delivery take?
Shipping is free and tracked, and goes by air. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send to check the fit of this shaft?
Send us the part number 17A2741140 together with the machine's serial number, and we will confirm the match before you order. We answer enquiries within 24 hours.