
1955022151, 195-50-22151 Seal Komatsu
Description
The Komatsu 1955022151 seal is an elastomeric element that closes the gap between a moving part and a stationary one. It is also written 195-50-22151, and it weighs 4.54 kg. What this kind of seal does A rotary lip seal rides on a shaft and seals a rotating joint. An O-ring sits in a groove and seals by being compressed across a static or slowly moving interface. Either way, the seal only works if the groove or bore size, the surface finish and the material suit the fluid and temperature. Signs it needs replacing The elastomer shows hardening, cracking or compression set from age and heat. On a rotary seal, the lip is worn or the shaft is grooved. An O-ring has been pushed into the clearance gap under high pressure. The material has swollen or shrunk because the fluid does not suit it. Fitting Replace the seal every time the joint is opened. Check the sealing surface and the groove dimensions before you fit it, and add a back-up ring where the pressure calls for one. Under ISO 3601-1, O-rings are specified by inside diameter, cross-section and tolerance, so have those dimensions to hand when you compare parts. Send us the number on the old seal and your machine's serial number, and we will confirm the match before you order.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.