
1957174250, 195-71-74250 Bushing Komatsu
Description
The Komatsu 1957174250 bushing is a cylindrical plain bearing that lines a bore, giving a low-friction, replaceable wear surface between a pivot pin and its housing. It carries the radial load, sets the running clearance of the joint and wears in place of the more expensive parts around it. What to know about this part It weighs 5.9 kg, measured on our scale. Our records link this number to straight and tilt frame parts, so check it against the joint you are rebuilding. Signs it needs replacing Slop in the joint: the bore has worn oval and the pin moves where it should not. Scoring on the bore: usually from poor lubrication or dirt getting in. Uneven wear at the edges: the pin is misaligned or the bushing was pressed in out of round. Fretting or corrosion at the press fit: the bushing no longer sits tight in its seat. Keep the grease path clear and the seals intact, because they keep lubricant in and dirt out of the joint. Send us the number stamped on your old bushing, plus its bore and outside diameter, and we will check it against this one.
Frequently Asked Questions
Should I replace the pin when I replace this bushing?
Replace the bushing as a matched set with its pin when clearance goes past the equipment maker's wear limit, rather than changing the bushing on its own.
How long does shipping take and does it cost anything?
Shipping is free to every destination and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.