
1957174270, 195-71-74270 Bushing Komatsu
Description
The Komatsu 1957174270 bushing, also written 195-71-74270, is a cylindrical plain bearing that lines a bore and gives a pivot pin a low-friction, replaceable wear surface. It weighs 1.98 kg, a net part weight measured on our scale. What it does at the joint The bushing carries the radial load of the pin while the joint turns, and it sets the running clearance. It is built to wear so that the pin and housing do not. That makes it a serviceable item rather than a lifetime part. Signs it needs replacing Slop at the joint, which comes from the bore wearing oval and the clearance growing. Scoring or seizure marks, usually from poor lubrication or dirt getting in. Uneven wear on one edge, which points to a misaligned pin or a bushing that was pressed in out of round. Fretting or corrosion at the press-fit surface. If you see any of these, keep the grease path clear and check that the seals holding the lubricant in are intact before fitting the new bushing. Otherwise the new one will wear the same way. Send us the number on your old bushing and the machine's serial number, and we will confirm the match before you order.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
Should I replace this bushing on its own or with the pin?
Replace it as a matched set with its pin when clearance goes past the equipment maker's wear limit, rather than in isolation. A new bushing on a worn pin will wear out quickly.