Marketplace of Heavy Machinery Spare Parts

2057067150, 205-70-67150 Bushing Komatsu

$156.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 2057067150
Availability: In Stock
A replaceable bushing that lines the bore of a pin joint and takes the wear so the pin and housing do not.

Description

The Komatsu 2057067150 bushing is a cylindrical plain bearing that lines a bore and gives a pin joint a low-friction, replaceable wear surface. It weighs 1.82 kg. How this kind of bushing wears The bushing is the sacrificial part of the joint. It carries the load and sets the running clearance, so it wears before the pin or the housing does. These are the failure modes to look for: Clearance growth as the bore goes oval, which shows up as slop and misalignment in the joint. Scoring or seizure from poor lubrication or dirt getting in. Edge loading and fatigue where the pin is misaligned or the bushing was pressed in out of round. Fretting and corrosion at the press-fit surface. When to replace Check the joint at scheduled service for measurable clearance and scoring, and keep the grease path clear and the seals intact. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit. Changing the bushing alone leaves a worn pin running in a new bore. To confirm you are ordering the right bushing, send us the number from your old part and your machine's serial number.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free on every order. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door, and every order ships with tracking.

Loading product...

Related Products