
2087061450, 208-70-61450 Pin Komatsu
Description
The Komatsu 2087061450 pin is a pivot pin: a cylindrical shaft that runs inside a bushing to make a serviceable rotating joint. It is also written 208-70-61450, and it weighs 61.88 kg. What it does in the joint The pin takes the shear load between the two linkage members and sets the running clearance of the joint. Pins are normally hardened and ground so that wear ends up in the cheaper bushing, not in the pin. Signs it needs replacing Scoring or wear on the pin surface that opens up the joint clearance A pin that is bent or out of round Pitting or corrosion where the surface layer has broken through Worn keeper plates or snap rings that let the pin walk out Check the pin for scoring, ovality and straightness at each service, and keep the joint greased. Replace the pin together with its mating bushing when either one is past its wear limit, because a new pin in a worn bushing wears out fast.
Frequently Asked Questions
How fast does shipping work and what does it cost?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send you to check this pin before ordering?
Send the part number 2087061450 and the serial number of the machine, plus the number stamped on the old pin if it is readable. Email them to [email protected].