
4174611151, 417-46-11151 Pin Komatsu
Description
The Komatsu 4174611151 pin, also written 417-46-11151, is a pivot pin that forms the axis of a pinned joint and mates with a bushing. It weighs 4.54 kg. What it does in the joint The pin carries shear load between the linkage members while they swing on it. Together with its bushing it sets the running clearance of the joint. A pin like this is normally hardened and ground, so the wear ends up in the cheaper bushing rather than in the pin. Signs it needs replacing Scoring or wear on the pin surface that opens up the joint clearance Ovality, or a pin that is no longer straight Pitting or corrosion where the surface layer has broken through Worn keeper plates or snap rings that let the pin walk out Bending or shear fatigue after shock loading Check the pin for scoring, ovality and straightness at service, and keep the lubrication and retention hardware in order. When the pin or the mating bushing passes its wear limit, replace the two together. A new pin in a worn bushing wears out quickly.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send to confirm this is the right pin?
Send us the part number 4174611151, the machine's serial number and the worn pin or its measurements. We will check them against each other before you order.